I/O GigaAce naming

Forums › Forums › SQ Forums › SQ feature suggestions › I/O GigaAce naming

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of BerndVP BerndVP 4 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2019/11/06 at 9:29 am #87469
    Profile photo of BerndVP
    BerndVP
    Participant

    So, what I’m wondering if there is any chance that this ever will happen:

    The I/O page of SLINK / GigaAce showing what stagebox is connected at the network.
    Would make some patching sometimes much easier…
    Like with the DX012 when switching between Analog outs or Digitals.

    2019/11/06 at 11:51 am #87470
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    Hi @berndvp,

    I will note the request for displaying which units are connected (though it may be tricky to fit the information in!).
    Regarding the DX012 – this always appears as a 16 output device, and then hardware switches on the unit are used to select what’s coming out of the sockets – so there is no way for the SQ to know what those switches are set to.

    Thanks!
    Keith.

    2019/11/06 at 2:27 pm #87474
    Profile photo of BerndVP
    BerndVP
    Participant

    Hi,

    thanks for the reply.
    Box info is more important.
    I can live with the DX012 like it is.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.