How to send outs?

Forums Forums Qu Forums Qu troubleshooting How to send outs?

Tagged: 

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 4 years, 7 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #49894
    Profile photo of radioboylives
    radioboylives
    Participant

    Just got the mixer on Friday and I’m completely lost when it comes to setting up the outs on each individual channel. I need someone to literally take me by the hand and guide me through this process. This is my first digital mixer by the way.

    #49896
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    What do you mean by “setting the out’s”?

    If you mean the levels to each mix then it might help to think of it differently.

    You set the channels into each mix, not the mix from each channel.

    Press the mix button on the right, the faders will all fly down, then the faders are controlling the mix out for each channel, just as they do for the FOH mix.

    #49899
    Profile photo of Dick Rees
    Dick Rees
    Participant

     Press a fader strip Sel key.
     Press the Touch Screen Routing key.
     Touch the tabs at the top of the screen.
     Touch screen buttons and use the rotary.
     Press the Fn key to access the Mute and DCA Groups.

    From p. 36 of the pdf manual.

    8.8 “Working with the Routing Screens”

    #49937
    Profile photo of radioboylives
    radioboylives
    Participant

    Thanks i figured it out. I feel so dumb.

    #49938
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    No need to feel dumb – it’s a new workflow 😉

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.