How to Route Signals to the MTX Outputs on QU-SB

Forums › Forums › Qu Forums › Qu troubleshooting › How to Route Signals to the MTX Outputs on QU-SB

Tagged: , , , , , , , , ,

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Creatav Creatav 6 years, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2017/12/02 at 6:35 pm #66645
    Profile photo of Creatav
    Creatav
    Participant

    Hi there,

    New to this forum so hope this hasn’t been addressed already.
    How do we select which levels go to the MTX outputs on the QU-SB using the QU-Pad app?
    The MTX outputs don’t have a corresponding button on the right hand side of the app like the other Mixes/destinations do.
    Would appreciate some help with this one…

    Thanks!

    2017/12/02 at 8:24 pm #66646
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Select MIX tab, scroll to the right, select desired Matrix, arrow top screen to show Matrix assignments.

    Attachments:
    You must be logged in to view attached files.
    2017/12/07 at 5:14 pm #66736
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Set individual channel levels within the Mix feeding the Matrix. Set Mix/Group levels from screen.

    2017/12/08 at 1:37 pm #66758
    Profile photo of Creatav
    Creatav
    Participant

    Thanks very much. Totally missed the arrow, but seemed so obvious once pressed.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.