How to Play a Channel solo

Forums Forums Qu Forums Qu general discussions How to Play a Channel solo

This topic contains 9 replies, has 4 voices, and was last updated by Profile photo of cornelius78 cornelius78 7 years, 10 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #55873
    Profile photo of Oz
    Oz
    Participant

    Hi i’m new Here 👍😎 And have a QU-16 -it’s a Great Thing 👍👍👍.
    How can I Play a Channel as Solo, because I don’t found a Solo Button 😏.
    Kind Regards Micha

    #55875
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    It’s called PAFL.

    Have you got the full manual?

    #55883
    Profile photo of Oz
    Oz
    Participant

    Yes, i know the manual ;-),
    Sorry, I have certainly described not entirely correct, what function I’m looking at the qu-16th Is there a way to switch a channel solo on Main Out, without any other active channels to mute ago

    #55885
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Solo to mains?

    Not obviously (at least not one that preserves mute states.

    You could set everything in a mute group, then mute all, unmute the one you want, then unmute the group after.
    However this will clear any legitimate mutes you had set before…

    If this is for playback or something similar then you could switch scenes?

    #55887
    Profile photo of Andreas
    Andreas
    Moderator

    …or use the Alt-Out instead of Main LR…

    #55889
    Profile photo of cornelius78
    cornelius78
    Participant

    I think the OP is asking for “solo in place.”

    #55890
    Profile photo of Oz
    Oz
    Participant

    Thanks all, And yes I look for a Solo one Channel at Main out And mute all Other in one step (Soundcheck with / without USB Play-back (I’m the Frontmann of out Band And the FoH too 😀😭). But it isn’t a Problem, if theres not a Solution.
    Micha

    #55891
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Alt out in place of LR might work then – allow PAFL to default to LR, and then when you PFL anything else it will just provide that instead.
    Risky in a live environment – but only if anyone touches the desk…

    #55922
    Profile photo of Oz
    Oz
    Participant

    Hi bob, nice idea, but it’s to “hot” 😜

    #55923
    Profile photo of cornelius78
    cornelius78
    Participant

    You know the alt out has a trim…

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.