How to configure Hoo Too mini router?

Forums Forums Qu Forums Qu troubleshooting How to configure Hoo Too mini router?

Tagged: 

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Keef Keef 5 years, 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #52480
    Profile photo of Pulgarin
    Pulgarin
    Participant

    How I can configure this router, this works for 16 Qu ? , The model is HooToo – TM06 – Tripmate Elite Wireless Travel Router

    Please help

    #52487
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    It has an AP mode. So you’ll need that.

    If it has DHCP then use it, else you’ll have to configure static IPs on all devices.

    #52488
    Profile photo of Keef
    Keef
    Participant

    Not sure of your experience with setting up a router, but a good starting point is P.83 of the current QU Mixer Reference Guide V1.8 – ‘Setting up the QU wireless network’.

    As Bob says, the TM06 router will need to be set up in AP mode (Access Point mode) – refer to the router manual for those settings. For reference and docs see:

    http://www.hootoo.com/hootoo-tripmate-ht-tm06-wireless-router.html

    Good luck!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.