High Pass Filter for Aux Sends

Forums › Forums › GLD Forums › GLD feature suggestions › High Pass Filter for Aux Sends

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2013/11/03 at 8:18 pm #35795
    Profile photo of RobRob
    Participant

    Would love to be able to set a High Pass filter on Aux sends.

    2013/11/04 at 10:20 am #35804
    Profile photo of SteffenRSteffenR
    Participant

    the low band in PEQ should do this

    2013/11/04 at 10:26 am #35806
    Profile photo of eotsskleeteotsskleet
    Participant

    the low band in PEQ should do this

    You only have a PEQ on Stereo Auxes! For Mono-Auxes you have a GEQ! Low-Pass for All Auxe-Sends would be nice but not really a “Must Have” in my mind!

    2013/11/04 at 10:28 am #35807
    Profile photo of Leon BigEars A&HLeon BigEars A&H
    Participant

    Every Mix has a GEQ and a 4-band PEQ, you can set the lowest band on the PEQ to high pass mode, The default range is 20-200Hz, if you need it to go higher than that select the full range EQ option on outputs via the pull up tab.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘GLD feature suggestions’ is closed to new topics and replies.