Headphone jack impedance

Forums Forums SQ Forums SQ general discussions Headphone jack impedance

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Sxyn Sxyn 2 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #105298
    Profile photo of Sxyn
    Sxyn
    Participant

    I thought about getting new headphones with 250Ω but could find the impedance for the headphone jack on the spec-sheet. Does any body know the exact value of ohms, or at least if 250 ohm would work?

    #105306
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    @sxyn

    The headphone amp in the SQ was developed from those used in our XONE DJ mixers which need to work in booths with crazy ‘ambient’ noise levels… so it’s pretty powerful.
    It’s able to drive most any headphones without issue, certainly I use my 250 Ohm DT770’s with my SQ all the time and very rarely need to go above 50% level.

    Thanks,
    Keith.

    #105311
    Profile photo of Sxyn
    Sxyn
    Participant

    I also had the DT770 in mind. Nice to know. Thank you.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.