GX4816 connection to S5000

Forums › Forums › dLive Forums › dLive General Discussions › GX4816 connection to S5000

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2021/12/19 at 2:55 pm #104961
    Profile photo of ChrisChris
    Participant

    I currently have a DM48 Mixrack connected to an S5000. On the DX5/6 of the S5000 I have a DX168.

    I have exceeded the capacity of the DX168, and the Mixrack is too far away to use from the back of house. I have a GX4816 and was going to replace the DX168, however, I am unable to get it to recognize on the DX ports.

    Am I missing something? I saw in the firmware reference notes a while ago that the GX4816 was supported and it is barely referenced in the firmware guide.

    2021/12/19 at 5:15 pm #104962
    Profile photo of ScottScott
    Participant

    The GX4816 must be connected to a GigaACE card, not a DX port.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.