Guide MTX

Forums Forums Qu Forums Qu general discussions Guide MTX

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Belfast Belfast 4 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #55536
    Profile photo of Belfast
    Belfast
    Participant

    Hi All,
    Im looking to use the Matrix(MTX) out for an extra set of speakers with a separat fader
    just cant seem to figur how to route it…?

    Anyone
    S. Kelly

    #55537
    Profile photo of xyz
    xyz
    Participant

    Hi
    Yes i have done this.
    2 sets of delays with the 2 matrix’s
    I used a ipad QuPad with a custom layer …
    Or you could use custom layer just on the surface?
    I sent the FOH post everything to matrix’s.
    Or you can send a mix to Matrix.
    But you cannot send a channel direct to matrix.
    Go to your upper layer
    select matrix and then Routing tab and then-function key to access the amounts of mixs

    Hope this helps
    If you get stuck I’ll send you a PM tomorow.

    NZdave

    #55586
    Profile photo of Belfast
    Belfast
    Participant

    HI NZDAVE thanks will give it a try when im home

    Cheers
    S. Kelly

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.