GLD Editor Connection

Forums Forums GLD Forums GLD troubleshooting GLD Editor Connection

Tagged: 

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 6 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #39441
    Profile photo of moon
    moon
    Participant

    Hello All,
    Can someone explain to me how to make a connection between the GLD-80
    and the GLD Editor software running on a Mac.
    I cannot get the software to see the mixer via a ethernet port.

    Cheers,
    Mike

    #39443
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Mike,

    – Is your Mac set to a static IP address compatible with the GLD (GLD default is 192.168.1.50) and to the same subnet mask?
    – Check Editor and GLD are both running the latest version of software.
    – Try switching off WiFi in your Mac. Sometimes it helps.
    – If your GLD does not appear in the dropdown box of the Editor Connection window, choose Custom and type in the GLD IP address manually.

    Hope this helps.

    #39453
    Profile photo of GCumbee
    GCumbee
    Participant

    Don’t you need a crossover cable if you are not going through a switch?

    #39459
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Most modern network interfaces will automatically configure a straight or crossover connection to properly match the other device. This is known as Auto MDI-X and it is implemented widely on most Ethernet devices.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.