GLD-80 Strip Meter LED Issue

[LBETParticipant]

Hi everyone, We’ve had a GLD80 at our church for about 18 months and recently the 3 of the LEDs in the strip meters on one of the channel strips stopped working. The “Sig” led works, the red overload LED works but the 3 leds in between them do not.

Has anyone seen this before and, if so, what was the fix? I suspect a hard failure and but if this can be fixed by re flashing firmware I’d be glad to hear that.

Thanks in advance for any guidance you can provide.

Larry B.
Acting TD
KHCC Brampton

[JosefParticipant]

Zdravím, dělalo mi jednou také, ale jak jsem zjistil bylo to velkým ,,utažením” kompresoru na vstupu. Stačí zmenšit kompresi.

[Author]

Posts