GLD 80 Not Passing Inputs to Outputs Upon Audio Config Change

Forums Forums GLD Forums GLD troubleshooting GLD 80 Not Passing Inputs to Outputs Upon Audio Config Change

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of Derian00 Derian00 4 years, 2 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #88769
    Profile photo of Derian00
    Derian00
    Participant

    I have a GLD80 setup with a bunch of inputs, many going into subgroups, then a bunch of outputs that everything is being routed into, I added a matrix, and I had enough resources, I didn’t delete any AUXes, Subgroups, nothing, just added the matrix, and the audio blipped, then completely stopped passing, I was seeing signal from the inputs, but nothing on the outputs, nothing on the groups, I double-checked and confirmed all routes, it should have been passing audio, but it wasn’t. Rebooted the console, still nothing, I had to recall the previous scene to get it passing audio again, but nothing else should have changed except for the added matrix output option.

    Suggestions?

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.