GEQ. Behaviour @ 31hz

Forums › Forums › Qu Forums › Qu general discussions › GEQ. Behaviour @ 31hz

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2018/01/16 at 3:46 am #68269
    Profile photo of GaryWGaryW
    Participant

    In the absence of a HPF on mains and monitors, question:

    Anyone know what happens below 31hz when the 31hz slider is taken to -12dB?

    Is it just a narrow fixed-Q notch?
    Or does it also cut below 31hz, like a full low cut?

    2018/01/16 at 1:39 pm #68282
    Profile photo of SRDSRD
    Participant

    It’s a third octave spec so the bell will extend to 26Hz.

    2018/01/16 at 11:00 pm #68298
    Profile photo of GaryWGaryW
    Participant

    That’s what I’d expect too, thanks

    2018/01/17 at 1:47 pm #68311
    Profile photo of Mike CMike C
    Participant

    For a simulated HPF I think a parametric EQ low shelf would be
    closer. Still not a true HPF with continuing per octave cut off.

    2018/01/17 at 1:51 pm #68312
    Profile photo of GCumbeeGCumbee
    Participant

    One of the most requested items is HPF on all mixes. Still being ignored with no explanation why. This needs to be on all series.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.