FX on AUX ? how it works

Forums Forums SQ Forums SQ general discussions FX on AUX ? how it works

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Jazzman Jazzman 3 months, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #97729
    Profile photo of Jazzman
    Jazzman
    Participant

    hello allen & heath family 🙂 we have an SQ6 in church, and i can’t figure out how to send an fx to one of my aux.
    do you have any idea how its works?
    thanks for your help

    #97730
    Profile photo of Mike C
    Mike C
    Participant

    Select the aux/mix you want to send the FX to, just like when you
    select the aux and then bring up channels you want to send to that aux/mix.

    With it selected go to the FX return channel of the FX you want to send
    to the aux/mix and bring up the fader as you would on an input channel.

    You can also select the routing screen menu and then select the FX return
    and then use the screen menu to adjust the aux/mix level.

    #97945
    Profile photo of Jazzman
    Jazzman
    Participant

    thank you for your help. I noticed that this way the effect is sent to LR and AUX. is it possible to send only reverb on aux 8 but not in LR?

    #97946
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    On the FX return channel in routing, you can turn that channel off regarding LR

    On the layer with the fx returns, when on LR press the assign button to the left and de-select the fx return.
    (the select button will turn off then)

    #98443
    Profile photo of Jazzman
    Jazzman
    Participant

    thank you for your help it works!

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.