Freeze on boot up (sometimes)

Forums Forums Qu Forums Qu troubleshooting Freeze on boot up (sometimes)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #115391
    Profile photo of DunnoDunno
    Participant

    I’ve a odd fault with my Qu16
    Turns on and freezes on boot screen shows qu16 and then nothing works?? Just had a brain freeze!

    Power down power back up its back running fine. (Will start and shut down fine after the initial glitch.)

    But…

    Leave for an hour or so and won’t boot again same again….

    So far I’ve done
    ✅ date to form ware with new version
    Tried to force start from usb stick which works
    Hard reset
    Changed leads checked fuses etc…

    Any one had similar problems?

    #115417
    Profile photo of GigaGiga
    Participant

    Never heard that one before. I think I would try to clean/reseat all the connectors I could find inside.

    Good luck !

    Giga

    #115462
    Profile photo of DunnoDunno
    Participant

    Thanks I’ll have a go with that…I’m pretty sure it’s a capacitor or something on initial kick up
    Ie first kick up not charged and 2nd time charge held from previous boot and enough to start up

    so something no quite reaching power to the processors etc…

    Has anyone got schmatics or service diagrams for the qu16 they can share?

    Thanks

    #117639
    Profile photo of berumenberumen
    Participant

    tengo un problema muy similar aveces arranca y jala un par de horas bien y luego se congela por completo

    #121325
    Profile photo of DunnoDunno
    Participant

    So still trying to solve this…. Allen and Heath are to busy to look at the mixer – any recommendations of repair guys in the Midlands that can repair these????

    Any one got the schematics they can help with???

    Pretty shocking that no support is given on a huge brand like this from UK distribution/ service seems but the mixer your on your own! Think this may be the last A+H product I’ll get 😡

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.