Firmware v 1.3 SQ6

Forums Forums SQ Forums SQ troubleshooting Firmware v 1.3 SQ6

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Flo84 Flo84 3 years, 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #79024
    Profile photo of Jeffmey
    Jeffmey
    Participant

    Hi i just downloaded firmware V 1.3 it wont go on to a formatted usb has error code-43 this operation cant be completed because one or more required items can`t be found

    #79029
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Jeffmey,

    Please make sure the firmware is no hidden in any folders on the drive – including the AHSQ folder.

    If you are still having trouble, please start a ticket at support.allen-heath.com so we can look into this further.

    Thanks!

    Alex

    #79039
    Profile photo of dusty
    dusty
    Participant

    Hi. I just updated one of my SQ-6s and I was able to assign the PAFL to an output but I cant seem to find a way to control the level on any knob or fader. I know you can control it from the PAFL menu window but that is not practical when mixing on the fly. Is there something I’m missing or is this not possible yet?

    #79041
    Profile photo of Flo84
    Flo84
    Participant

    Hi dusty,

    Check the new manual 1.3 version p.61 and 66 you should get the information that you want 😉. (Master fader mode fonction)

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.