Firmware 1.4.2

Forums › Forums › SQ Forums › SQ general discussions › Firmware 1.4.2

Tagged: 

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of Lozion Lozion 4 years, 9 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2019/07/18 at 2:10 pm #85322
    Profile photo of Bracumba
    Bracumba
    Participant

    Just to share that I had the same issue with Dante/48kHz as has been reported.
    Going back to 1.4.1 resolved the problem here to.

    2019/07/18 at 8:11 pm #85335
    Profile photo of rottmat
    rottmat
    Participant

    I can’t find 1.4.2
    But jesterday i read found it

    2019/07/18 at 8:14 pm #85336
    Profile photo of Bracumba
    Bracumba
    Participant

    They have it removed because of the problems

    2019/07/18 at 9:53 pm #85339
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    Hi both,
    We did indeed manage to reproduce an issue with one unit, and are currently investigating.
    The fixes and improvements were fairly minor, so as a precautionary measure we have removed the downloads for the time being.
    @johanaben – it would be great if you could raise a ticket using support.allen-heath.com about this.
    Thanks,
    Keith.

    2019/07/22 at 2:33 pm #85419
    Profile photo of Lozion
    Lozion
    Participant

    Good to know

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.