Faderwing for SQ

Forums Forums SQ Forums SQ general discussions Faderwing for SQ

This topic contains 2 replies, has 1 voice, and was last updated by Profile photo of ioTon ioTon 3 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #95951
    Profile photo of ioTon
    ioTon
    Participant

    Thx to Keith for the Link to the BOMEBOX!

    https://www.bome.com/products/bomebox#

    https://www.youtube.com/watch?v=BHdUXShzQBo

    Haven’t tried it yet – but I ordered the Box and will test it!

    Can be a big thing!

    greetings dd

    #98456
    Profile photo of ioTon
    ioTon
    Participant

    Hi A&H users,

    Maybe someone is interested:
    I got my icon Platform M+ running as Faderwing for the SQ – via the Bomebox!

    SQ -> WIFI Router -> WIFI -> Bomebox -> icon Platfrom M+

    But i think it should work with every HUI Protocol – maybe with some adjustments…

    To setup the surface on the icon i use the encoders (while pressing the rec Button to edit)
    So i can create a userdefined surface as it’s done on the SQ (but without drag&drop 😉

    Faderflip can be done with the “SEL” Buttons (AuxSnd 1-8) and Encoder Knobs (AuxSnd 9-12 & FxSnd 1-4)
    Mutegroups 1-8 are programmed to the “Rec” Buttons.
    Solo Buttons are used for the User Defined Buttons.

    The .bmtb file (Bome MIDI Translator) is attached, which is needed to translate the MIDI Commands.

    I’d be happy to get some feedback!
    have a nice day,
    greetings,
    dd

    #98457
    Profile photo of ioTon
    ioTon
    Participant

    try to upload the file as .zip =)

    Attachments:
    You must be logged in to view attached files.
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.