EQ settings gain=0

Forums Forums Qu Forums Qu general discussions EQ settings gain=0

This topic contains 5 replies, has 5 voices, and was last updated by Profile photo of jet1968 jet1968 6 years, 3 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #44288
    Profile photo of slowhand73
    slowhand73
    Participant

    I have a Qu24 for my band and a Qu32 for studio. So I can’t get 0dB on gain in EQ with my knob – is it by you too ? Or is it normal ?

    #44292
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    I’ve hit that before as well, probably depends how you set it (touchscreen vs knob)

    #44293
    Profile photo of GCumbee
    GCumbee
    Participant

    I have both a GLD and a QU. I have noticed that the QU is a lot more touchy about both screen touch and knob settings.

    #44295
    Profile photo of slowhand73
    slowhand73
    Participant

    so, ok. I found out, that when you put the gain to it highest point and than to it lowest point, you be able to get 0dB.
    But when you on 1.5 dB or other and want to 0dB it doesen’t work.

    #44312
    Profile photo of dmarin
    dmarin
    Participant

    Yes that’s happens very often to my qu16.
    Sometimes when i adjust eq, i can’t “reset” it to 0db

    #44322
    Profile photo of jet1968
    jet1968
    Participant

    hold the reset button whilst pressing the PEQ button in the super-strip, although this will reset ALL bands on the channel to zero

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.