EQ for FX unit

Forums › Forums › dLive Forums › dLive feature suggestions › EQ for FX unit

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 2020/12/02 at 5:13 pm #96850
    Profile photo of SanjOkSanjOk
    Participant

    Hi.
    Interested in the possibility of adding an equalizer before entering the reverb or delays and other FX. There was also the possibility of compression on the unit’s output.

    2020/12/04 at 4:44 pm #96923
    Profile photo of RSRS
    Participant

    If you re-route the FX unit to get input from a aux send and the returns to a “normal” input channel you get all you asked for.

    2020/12/04 at 6:24 pm #96925
    Profile photo of Mfk0815Mfk0815
    Participant

    Hmm, it would be easier when you can route the fx return directly to input channels with the whole processing as it is possible with other consoles.

    2020/12/04 at 6:51 pm #96927
    Profile photo of RSRS
    Participant

    @mfk0815 that is exactly what I was talking about. Route the fx return to a input channel! And for send processing (eq before the fx unit), use a aux send, instead of the fx send.

    2020/12/04 at 9:12 pm #96931
    Profile photo of SanjOkSanjOk
    Participant

    Hi.
    in this case 2 additional channels (input and send) are definitely involved … 🙁

    2020/12/04 at 9:19 pm #96933
    Profile photo of RSRS
    Participant

    You have projects with that high of input channel count? And for the sends you loose nothing, as for the fx sends you cancel, you get additional mixes, which could be your aux sends for fx, no?

    2020/12/04 at 9:27 pm #96934
    Profile photo of SanjOkSanjOk
    Participant

    thanks it works !

    2020/12/05 at 12:58 am #96938
    Profile photo of RSRS
    Participant

    welcome…

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.