EQ enhancements

Forums Forums Qu Forums Qu feature suggestions EQ enhancements


This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of 0liver 0liver 10 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #35775
    Profile photo of SteffenR

    some ideas…

    1. high and low pass settings
    2. switches to change the filter characteristics on high and low
    3. copy/paste/reset on single bands
    4. fill the graphics with colors (like on the iLive)

    so far for now…

    Profile photo of 0liver

    For both the unit and qu-pad app,

    – Having the ability to turn on/off each band in the parametric EQ, similar to how EQ’s in DAW’s work.

    – being able to type in the frequency, amplitude, or Q using an on screen number pad.

    – having the amplitude value of the frequency you are cutting or boosting above or below the fader. Currently there is no indication of how much you are actually cutting/boosting on the app.

    Profile photo of 0liver

    .. another idea, working with the QU-APP, is that it’s a little cumbersome to adjust the Q on the points. Pinching in/out from left to right is great, but I think it would be more ergonomic to pinch up and down. It’s less likely that you will hit another freq node using up and down. Even having a finger on the node and while your finger is at the freq/amplitude, dragging your thumb towards (up) or away (down) to adjust the Q would be more logical and less likely to cause errors.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.