Effects return 1 not showing up in Aux mixes

Forums › Forums › SQ Forums › SQ troubleshooting › Effects return 1 not showing up in Aux mixes

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2023/10/20 at 4:42 am #115851
    Profile photo of MattMatt
    Participant

    For some reason the effects return 1 is not showing up in any of my aux mixes. Affects 2,3, and 4 are showing up. See picture….

    Attachments:
    You must be logged in to view attached files.
    2023/10/20 at 5:44 am #115855
    Profile photo of Søren SteinmetzSøren Steinmetz
    Participant

    You have removed it from the Layer in Settings/Surface.

    2023/10/21 at 3:14 am #115871
    Profile photo of MattMatt
    Participant

    Thank you! Would be able to briefly describe how to get it back? Thanks!

    2023/10/21 at 11:26 am #115876
    Profile photo of SQuserSQuser
    Participant

    > You have removed it from the Layer in Settings/Surface.
    … or you have assigned this FX as an insert.

    > Would be able to briefly describe how to get it back?
    As described in the manual on page 69.

    Attachments:
    You must be logged in to view attached files.
    2023/10/21 at 7:12 pm #115895
    Profile photo of MattMatt
    Participant

    I dragged and dropped fx1 into the strip assignment. It’s showing on the screen that it’s there but it’s not showing up on the channel strip. It’s assigned correctly as well. See pictures.

    Attachments:
    You must be logged in to view attached files.
    2023/10/21 at 8:14 pm #115900
    Profile photo of SQuserSQuser
    Participant

    > … or you have assigned this FX as an insert.
    And are you really sure that the FX (in his back panel) is not routed as an Insert, but as a Mix->Return (manual page 53)?

    Attachments:
    You must be logged in to view attached files.
  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.