Dyn8 alias

Forums › Forums › dLive Forums › dLive feature suggestions › Dyn8 alias

This topic contains 4 replies, has 5 voices, and was last updated by Profile photo of Jack_AH Jack_AH 6 years, 11 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2017/05/22 at 3:35 am #63489
    Profile photo of magneticfield
    magneticfield
    Participant

    It would be very good an alias in the dyn8 … the idea is that it is called with the name of the channel that is processing instead of a number. This is especially useful in scene management, safe, filter, etc. In my case I am working to show in which I am adding dyna8 processors to the scenes increase and in a case like this, an alias the name of the processor would be very useful and would of Life much easier… I hope you understand, many thanks.

    2017/05/23 at 2:47 pm #63528
    Profile photo of SteffenR
    SteffenR
    Participant

    indeed that would be good…

    2017/05/25 at 4:51 pm #63577
    Profile photo of pete.j
    pete.j
    Participant

    Yapp, I also prefer channelnames than numbers, because most engineers think in names not numbers 😉

    Was the same on the recall-filter but they implemented it in 1.5 ….

    2017/05/26 at 12:37 am #63587
    Profile photo of brandon
    brandon
    Participant

    Yes, this is needed.

    2017/05/26 at 9:29 am #63591
    Profile photo of Jack_AH
    Jack_AH
    Moderator

    I’ve added this as a feature request 🙂

    Jack

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.