DX-168

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Greyskull Productions Greyskull Productions 5 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #79914
    Profile photo of Joseph
    Joseph
    Participant

    In DX168 redundant mode can I connect to two SQ6 mixers(FOH&Mon)?

    #79926
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    Hi Joseph,

    No – it is not possible to connect two consoles to one expander.
    An expansion unit expands the console’s i/o, you would then need to use a system to system connection to share audio between the two consoles.

    Cheers!
    Keith.

    #80565

    To further clarify what Keith is saying: to properly split to two sq consoles either you need to have two separate dx units with an analog split, connect the two consoles together through the slink port, or when it FINALLY hits the market get an slink option card so that the dx will feed one console then get passed to the second.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.