Duplicate Inputs

Forums Forums Qu Forums Qu general discussions Duplicate Inputs

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #112163
    Profile photo of Nate Nagel
    Nate Nagel
    Participant

    Hey, need some help. I want to make duplicate inputs for channels 1-5 for my monitors. Then I can EQ each voice channel to not feed back in the monitor but still have a flat EQ for FOH. My QU PAC is my only mixer and I don’t want to buy a split or an expansion box to do this.

    I thought I would do this by going to I/O Patch and Monitor section, and assigning 17-21 to CH1-CH5, or by changing the source on 17-21 to Local (but I can’t choose channels 1-5), so it seems like neither of these are working. Any tips?

    #112165
    Profile photo of Mike C
    Mike C
    Participant

    Without using an expansion / stage box you can not double patch the channels.
    You will need to use a Y cable to split those inputs.

    Actually you should ring out the monitors for feedback using the monitor mix output
    EQ, use the parametric.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.