DT770 250phm through QU headphone jack?

Forums › Forums › Qu Forums › Qu general discussions › DT770 250phm through QU headphone jack?

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Chris93 Chris93 1 year, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2022/05/30 at 9:21 am #107362
    Profile photo of Chris
    Chris
    Participant

    Hi,

    Can anyone here confirm if DT770 250ohms would run fine via the QUs headphone jack or is sticking to 80ohms a wiser move? (have a QU24 if that helps).

    2022/05/30 at 11:32 am #107363
    Profile photo of Mike C
    Mike C
    Participant

    They will work fine, you may notice a little lower output level compared to a lower impedance headphone.

    2022/05/30 at 11:56 am #107366
    Profile photo of Chris93
    Chris93
    Participant

    For what it’s worth, I’ve used 250 Ohm DT770s with both GLD and SQ with no issues. No idea of the headphone amps in those are the same as each other, or the same as Qu, but it would seem like a pretty re-usable bit of design work…

    Chris

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.