dlive scene update

Forums › Forums › dLive Forums › dLive General Discussions › dlive scene update

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 4 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2020/04/17 at 8:56 am #91096
    Profile photo of NikoLaasonen
    NikoLaasonen
    Participant

    Hi,

    I have a question about scene update feature. Since I have a feeling that I have understood it wrong.
    I have used Digico consoles, which have similar feature for automation. And Digico consoles have the right way to do this thing.
    So I thought that if I turn on “auto tracking”, all the changes made after turning on will be made to the scenes?
    But since I somehow messed 40 scenes yesterday, I assume that I didn’t understand how it works. I turned on auto tracking, changed ABCD-input setting for one channel and pressed update button. After that I had several channel levels changed in all the scenes.
    Manual is a bit unclear of this topic, but I got the impression that update saves all changes after last scene recall?

    -Niko Laasonen

    2020/04/20 at 12:24 pm #91180
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Niko,
    If you haven’t already, watch this webinar recording where around 12:30 Ben explains the Update options:

    If you’re stuck, you can submit a support ticket at support.allen-heath.com

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.