dLive Networking Question

Forums Forums dLive Forums dLive General Discussions dLive Networking Question

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of Showtime Showtime 4 months, 2 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #97598
    Profile photo of Sound Guy Jeff
    Sound Guy Jeff
    Participant

    Greetings! Just getting up and running with our new dLive system. I do have one question about control networking, here’s my setup:

    S7000 – FoH
    DM64 – Racked in Server Room
    SQ7 – On Stage for Monitors
    FoH Mac – Connected to the S7000 via waves card, with an ethernet bridge from the console network port.

    The Mac at FoH is for S7000 console control via Director. I would like to be able to control the SQ7 from this Mac as well via MixPad. My question is how can I make this connection?

    The S7000 is connected directly to the DM64 via GigaAce. The SQ7 currently connects to the DM64 via a GigaAce card. Can I use this GigaAce network from FoH for SQ7 console control in this setup?

    If you need any additional info please let me know!

    Thanks,
    Jeff

    #97602
    Profile photo of SanjOk
    SanjOk
    Participant

    Hi!
    You need a gigabit network switch…

    #97603
    Profile photo of SteffenR
    SteffenR
    Participant

    you need to link the mixrack control network with the SQ control network

    You need a gigabit network switch…

    no… since there is one in the mixrack already

    #97604
    Profile photo of Showtime
    Showtime
    Participant

    For the s-link card in the sq there is a linking option. The giga-ace card has a link switch. I can try tomorrow if this works.

    #97655
    Profile photo of Showtime
    Showtime
    Participant

    The sq doesn’t bridge the network data over slink. So from dlive your have to run separate network and slink to the dlive.

    Richard

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.