DLive Midi Out

Forums Forums dLive Forums dLive General Discussions DLive Midi Out

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of ddff_lv ddff_lv 5 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #84738
    Profile photo of CalebCarter
    CalebCarter
    Participant

    Is there a way to send midi notes from a DLive surface to a Tascam TA-1VP? The Tascam unit has 5-pin midi ports, and from what I understand, the DLive system uses TCP? Right now I’m using a Digico console at FOH, and using the midi output of the desk to change presets on the Tascam via snapshots. Is there a way to replicate the same process on a DLive surface?

    #84740
    Profile photo of RS
    RS
    Participant

    Use Bomebox to translate from Ethernet to Midi. It supports dLive.

    #85020
    Profile photo of ddff_lv
    ddff_lv
    Participant

    By the way, has anything changed in couple of latest FW regarding MIDI?
    I’ve tested my show with Bome box, that worked year ago, but desk can’t seem to get programm change messages. Bome box sees the desk, has both routes active, I even upgraded FW in it, but no luck.
    Maybe I’m missing something obvious?

    #85031
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Never mind- after the reboot of Bome box it just worked.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.