Display problem

Forums Forums GLD Forums GLD troubleshooting Display problem

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Scott Scott 1 month, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #79098
    Profile photo of icecool
    icecool
    Participant

    150/5000
    Hi, my gld 112 sometomes hangs and presents this problem that I attach. now he is in assistance. has anyone ever encountered the problem? Thank you

    Attachments:
    You must be logged in to view attached files.
    #79627
    Profile photo of Nik
    Nik
    Participant

    Hey.
    I have the same issue when i turn on the GLD. But the stripes are on the left side of the screen. After about 40sec boot time, all is fine though and i can work normally with the GLD.
    Is this normal??

    https://photos.app.goo.gl/dcwPv7mzsu1hKSb87

    #79649
    Profile photo of icecool
    icecool
    Participant

    I’m waiting for return warranty replace cable of touch display… Mi I hope fine!!! One month without mixer 😢

    #79651
    Profile photo of Scott
    Scott
    Participant

    I see that during a normal boot, but it is only momentary. Do you have a STATIC IP address set on your unit? If not, it will take awhile to get past requesting a DHCP address when it’s not plugged into a network. It can look like it’s hung when it’s really waiting for an IP address.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.