Display HPF and LPF on EQ bridge

Forums › Forums › dLive Forums › dLive feature suggestions › Display HPF and LPF on EQ bridge

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 2021/07/09 at 11:48 pm #102284
    Profile photo of dylanwhitedylanwhite
    Participant

    You can select the bottom of the screen to display the PEQ. The main PEQ screen also shows the HPF/LPF curves. It would be useful to see these in the display at the bottom of the screen.

    2021/07/15 at 7:04 pm #102372
    Profile photo of DuesenbertDuesenbert
    Participant

    +1, would love this

    2021/07/27 at 12:00 am #102546
    Profile photo of WolfgangWolfgang
    Participant

    There is a clear display for HPF and LPF on the left side of the main window. I find this very clearly solved.

    2021/07/27 at 9:40 am #102548
    Profile photo of RSRS
    Participant

    I find this very clearly solved.

    Not for people running surface-less….

    2021/07/27 at 1:06 pm #102556
    Profile photo of SteffenRSteffenR
    Participant

    It’s the same on surfaceless setups…

    as alrady mentioned many times before… the south area needs more views 😉

    2021/07/30 at 7:44 pm #102616
    Profile photo of JFugJFug
    Participant

    +1, while not a NEED, it would definitely be cool! I’d also love a way to see AMM meters or something down there…

    2021/07/30 at 10:01 pm #102621
    Profile photo of WolfgangWolfgang
    Participant

    OK, I would also like a display of the AMM meters here.
    Good idea!

    But that already exists 😉

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.