Director / IP8 – add Ch #'s and type in the square

Forums › Forums › dLive Forums › dLive feature suggestions › Director / IP8 – add Ch #'s and type in the square

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of glparke glparke 11 months, 3 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • 2023/05/03 at 4:16 pm #112692
    Profile photo of glparke
    glparke
    Participant

    I am running a DM0 with Dlive Director and 3 IP-8’s for fader control. It would be great if on the IP-8’s right under the Mute status, if it would show “Ip 3” for mono input 3, or “DCA 4” for DCA 4. There is room there under the mute and above the name. Would be very helpful so you know what “type” of fader it is and what it’s channel number is.
    Same with Director. Director at least shows St and then the Ip underneath, but it would be helpful if it would show Ip and then the ch number. Or put it all on the top line. St Ip 8, or St Grp 8. Same thing with Groups, DCA’s, etc. Seems like there is some open label real estate that would be awesome to take advantage of.

    Thanks!
    Gary

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.