Direct out follow DCA fader/mute

Forums › Forums › dLive Forums › dLive feature suggestions › Direct out follow DCA fader/mute

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2016/11/20 at 7:58 am #59410
    Profile photo of ddff_lvddff_lv
    Participant

    I have a feeling I saw this feature already, maybe in earlier SW? Now I could not find it.

    ddff

    2016/11/20 at 9:11 am #59411
    Profile photo of JuergJuerg
    Participant

    Hi ddif

    Try ‘MIXRACK / Mixer Pref / Direct Output’ …

    Juerg

    2016/11/21 at 10:00 am #59426
    Profile photo of ddff_lvddff_lv
    Participant

    Hmm, there is no mixer pref in mixrack menu. This was on iLive.

    ddff

    2016/11/21 at 10:14 am #59427
    Profile photo of JuergJuerg
    Participant

    Aaahh, sorry, my fault.

    On dLive it’s on the ROUTING screen, top right ‘Global Direct Output Source’.

    Juerg

    2016/11/21 at 5:43 pm #59454
    Profile photo of ddff_lvddff_lv
    Participant

    No, there I can only chose from which point in signal path Direct out will take signal and via setup button I can tell if the DO will follow fader and/or mute. Just like on iLive.

    ddff

    2017/03/04 at 1:05 pm #61799
    Profile photo of tortor
    Participant

    Hold down Setup and touch anywhere in the Routing screen to access further options for the Direct Out including Follow Fader and Follow Mute.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.