Direct out as monitor mix

Forums › Forums › Qu Forums › Qu general discussions › Direct out as monitor mix

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Dick Rees Dick Rees 6 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2017/10/30 at 2:31 pm #65983
    Profile photo of necos
    necos
    Participant

    I am using Midas Venice 320 as monitor mixer. Direct out is used to route specific channels to FOH.
    how i can configure QU32 to the same thing ?

    2017/10/30 at 3:35 pm #65985
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Qu desks don’t have direct out (other than over USB).

    How many specific channels do you need to send to FOH? – How many outputs do you need for the monitors?

    There are somewhere around 2 dozen outputs available from the Qu-32, though how many of them are useful to you depends on what you want to do…..

    2017/10/30 at 5:17 pm #65989
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Best bet is to use a splitter box on stage and feed both boards from it.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.