DCA/Sound Issue

Forums Forums Qu Forums Qu troubleshooting DCA/Sound Issue

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of GCumbee GCumbee 5 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #53666
    Profile photo of Jtate
    Jtate
    Participant

    We are running a GLD80. I have choir mics assigned to a DCA. My problem is, if I PFL the individual mics or PFL the Choir DCA, I can hear the proper volume of sound. But, If I PFL the MAIN, I can barely hear the choir mics in the Main Mix. I’ve tried pulling the volume on the DCA up and the individual mic. any suggestions on why volume not in the main mix at the level it should be?

    #53670
    Profile photo of GCumbee
    GCumbee
    Participant

    Unless I am missing something it sounds like a gain staging problem. Do you have your headphone control and PFL level up high? If so then what maybe happening is that the level is still way too low in the mix but seemingly loud in the channel PFL. Thing to do is get the levels correct on the meters and mix PFL. Then adjust PFL or hp level to suit.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.