DCA routing indication on tabs

Forums Forums dLive Forums dLive feature suggestions DCA routing indication on tabs

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 7 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #61605
    Profile photo of Arild G
    Arild G
    Participant

    1 Indicator. When routing DCA group i would like to have a green indicator dot on each tab that have any element represented in the routing. That would give a good overview without the need to go to the separate tabs to see if there is any element selected in that tab. With seven tabs to choose from it takes time to go through all to check. If they all had their green indicator when used it gets way more effective.

    2 Clear selection button. Each tab should have a separate Clear Selection button to be able to clear all selected items in one go.

    Regards
    Arild Grindheim

    #61899
    Profile photo of CeDoMain
    CeDoMain
    Participant

    I agree – Clear Function will be much faster. I think about an combination of RESET and DCA-SEL.

    #61900
    Profile photo of SteffenR
    SteffenR
    Participant

    To Clear a DCA use reset and the desired mix button
    if you select a DCA group you will see all it’s members in the screen listed

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.