DCA LEDs Don't Work

Forums Forums GLD Forums GLD troubleshooting DCA LEDs Don't Work

Tagged: , ,

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of GCumbee GCumbee 7 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #51136
    Profile photo of DBellis

    I recently started working on a GLD 80 mixer and soon after noticed that all the monitor LEDs work, showing the channel signals, and the two main output channels that are in the eight faders on the right work, but the other six channels on this side that are DCAs don’t show anything on their LEDs regardless of where the faders are. All the channels are functioning, as in they properly control the channels being routed through them, they just don’t have LED visualization.

    Is there something I can change so this works?

    I’m new to this digital, but one’s I’ve worked with in the past have worked.

    Thanks ahead for any help.

    Profile photo of GCumbee

    DCA fader channels do not pass audio hence the signal LEDs do not work.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.