DCA confusion

Forums Forums Qu Forums Qu general discussions DCA confusion

Tagged: 

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Mike C Mike C 1 week, 5 days ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #86301
    Profile photo of Lexinton
    Lexinton
    Participant

    I have vocals assigned to a DCA. I’ve realized that moving the DCA on the FOH mix is affecting the volume of the vocals on the pre fader mixes I’ve set up for monitors. Is there a way for that not to happen?

    #86302
    Profile photo of Lexinton
    Lexinton
    Participant

    I just read this in the manual.

    The DCA master Fader adjusts the level of assigned channels at their channel fader point and
    before the Pan control. This means that post-fade levels to the LR mix and effects are
    adjusted. Pre-fade monitor sends are not affected.

    This is not happening on this board, Anyone have any ideas why the DCA’s are changing the levels on the prefader mixes?

    #86306
    Profile photo of Steffen R
    Steffen R
    Participant

    please select a channels routing screen and make a picture for us

    #86311
    Profile photo of Lexinton
    Lexinton
    Participant

    Thanks Steffen, I’m not at the board right now, when I get a chance I’ll post that.

    #86322
    Profile photo of Mike C
    Mike C
    Participant

    Do you by chance have any of the mixes also assigned to that DCA?

    Have you double checked that the mixes are indeed set for pre fade…had to ask.
    You can globally set the mixes to be pre or post and still go and change them on channel by channel basis.

    When you get a chance post up the pictures.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.