db number on EQ display

Forums › Forums › Qu Forums › Qu feature suggestions › db number on EQ display

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Ron Ron 9 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2014/09/10 at 8:22 pm #41520
    Profile photo of GR-PDX
    GR-PDX
    Participant

    I posted this before, but I think my incendiary comment that A&H should also invest in a new forum server caused it to be deleted. (Kudos on the new server, BTW!)

    Anyway…

    I would really appreciate knowing how many db I’ve adjusted a band on the graphic EQ. Trying to eyeball 4.17mm/db on a fader is not trivial. Could that number be displayed on the EQ screen? Doesn’t even necessarily have to be associated with any particular band, especially if the band being adjusted is highlighted in a different color.

    2014/09/19 at 3:47 am #41730
    Profile photo of Ron
    Ron
    Participant

    Yes this would be nice. along with db markings on the compressor to show how much gain reduction I’m getting.

    Ron

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.