DB level on scribble strips

[MaxdrumsParticipant]

Hi all it would be a great update to see the Db level in a scribble strip when moving faders.

[robashardParticipant]

I’ll be honest, no! The fader is where it’s at because it sounds right. I’d rather not lose any space on the scribble strip to this.

[Chris93Participant]

I’d like this. It’s useful when setting up post-fade sends to exactly 0dB for example, and it doesn’t have to take up any space if it only shows the fader level as it’s being moved, as on GLD.

Chris

[jduggerParticipant]

I’d like this. It’s useful when setting up post-fade sends to exactly 0dB for example, and it doesn’t have to take up any space if it only shows the fader level as it’s being moved, as on GLD.

I made a flavor of this request for exactly this reason. My request was to be able to program a soft key to set the current track selection to 0 for USB returns.

[KeithJ A&HModerator]

@chris93 – Hold the ‘Reset’ key and push the fader toward -inf or 0dB to ‘jump’ to those points 🙂

[MarkPAmanParticipant]

Well I didn’t know that! Thanks Keith. Thought the levels showing, so I can set everything to -6dB or whatever, would still be good.

Now, is there also a quick way to centre the pan?

[OrionXParticipant]

+1 for db levels on the scribble strips.

I love the “fader jump to 0db or -inf” ability (I use it all the time), but levels on the scribble strips would be very useful.

[GyuriParticipant]

+1

[30sthParticipant]

agree!

another idea: Display it on the meters screen

[MaxdrumsParticipant]

+1

[tomosParticipant]

+1

Thanks @KeithJ A&H, for this shortcut.:)

[New2SQParticipant]

+1 ABSOLUTELY!!!

The soft rotaries do it, can’t be that hard to implement it to the faders, right?

[Author]

Posts