Dante recording problems.

Forums › Forums › GLD Forums › GLD general discussions › Dante recording problems.

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of grmusik grmusik 5 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2017/09/14 at 5:16 pm #65263
    Profile photo of GCumbee
    GCumbee
    Participant

    Ran into a weird problem. Have GLD80 Setup with Dante card. Connected to MacBook Pro running Dante Virtual Soundcard. Recording 44 track in Presonus Studio One Pro 3.5. This all worked fine few weeks ago. Yesterday I did a test. This is for an event on Sept 23. Well now I get a CPU spike every few seconds. With a pop in the audio. It only happens with the DVS running. I’ve tried everything I can figure out to do. Audinate had several suggestions but nothing working. Presonus very difficult to get any information from. Any ideas?

    2017/09/17 at 9:33 pm #65302
    Profile photo of grmusik
    grmusik
    Participant

    I’ve had comparable issues using Logic Pro for recording (with DVS). Try Tracks Live from Waves. That solved my problems. Presonus Capture will probably work too. Maybe a DAW puts to much load on the CPU.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.