Dante Record

Forums › Forums › dLive Forums › dLive General Discussions › Dante Record

Tagged: , , ,

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 7 years, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2017/03/06 at 6:01 am #61839
    Profile photo of dylanwhite
    dylanwhite
    Participant

    Am trying to do 64 channels out via Dante into Reaper to be able to do virtual soundcheck etc.

    In order to get all the channels going out of Dante pre fader/eq/compression/processing, do I just have to press ‘Record Send’ in the I/O virtual soundcheck tab?

    I did a record last night but when routing back into the surface it sounds as if everything was being processed twice when I hadn’t pressed the ‘Record Send’ button.

    Cheers
    Dyl

    2017/03/06 at 1:36 pm #61854
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Dylan,

    The Record Send will patch the audio of the channels straight after the preamp (pre digital trim).
    When Record Send is NOT active, the Dante card will send whatever is patched to it in the I/O screen e.g. the channel Direct Outs (which follow the Direct Out source option and could well be post processing depending on your settings).

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.