Dante "Not Connected"

[tutu13]

Hello everyone,

I parted ways with the Waves card for a Dante V3 64×64,
the MacBook recognizes it as a sound card,
but I have the impression that the SQ does not see it, in the I/O table I read: “I/O Port Not Connected” while the Waves was recognized.

Firmware SQ 1_5_9

PS. However, I can set the audio synchronization of the SQ to “Port I/O” (4 frequencies to choose from).

I must have probably forgotten something… but what?

[Brian]

Update the console’s firmware to the latest (1.5.10). Some recent changes in the Dante card’s components require the new firmware to be used. The cards are not recognized by the console without the updated firmware.

[tutu13]

ok Thanks Brian !

[Author]

Posts