Cubase to QU over USB B

Forums › Forums › Qu Forums › Qu general discussions › Cubase to QU over USB B

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of mervaka mervaka 8 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2015/05/27 at 7:30 pm #48328
    Profile photo of ClardySound
    ClardySound
    Participant

    I’m using my QU24 in my home studio with excellent results. One thing that’s throwing me though is that the main outs of Cubase seem like they need to be knocked down to -18db on the QU preamp gain for ST3. I have my main outs in Cubase set to send back to the QU over USB B to ST3. Are my main levels set properly? I assume it has something to do with 0db on the QU = -18dbfs in Cubase, and Cubase is sending full scale out to the QU. I want to make sure my powered monitors are set correctly too. How should I go about this? Thanks.

    2015/05/27 at 8:20 pm #48329
    Profile photo of mervaka
    mervaka
    Participant

    That is correct. 0dB on the Qu meters is -18dBFS.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.