Crack in the PAFL monitor at the start of the surface

Forums Forums dLive Forums dLive troubleshooting Crack in the PAFL monitor at the start of the surface

Tagged: , , ,

This topic contains 2 replies, has 1 voice, and was last updated by Profile photo of GerMan GerMan 3 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #58245
    Profile photo of GerMan
    GerMan
    Participant

    Hello,
    we has the dLive in a fixed installation. The power supply for all components (Surface, MixRack and active monitors) is switched-on at the same time. With start to the surface there is, at the moment if switched-on the LED strip of the surface, a loud crack in the monitor (IEMs PAFL). With the other outputs (main, groups, aux etc.) does not happen apparently. I test this, however, once more.
    Is this a failure? From the GLD with similar configuration I do not know this behaviour.

    I hope that I have expressed myself understandably.

    thanks
    Maik

    #58423
    Profile photo of GerMan
    GerMan
    Participant

    Here sometimes a video with the click after him switch on the surface.
    http://de.tinypic.com/r/2lcqmpc/9

    Maik

    #58424
    Profile photo of GerMan
    GerMan
    Participant

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.