CQ18T Shared FX item on Aux Out?

Forums Forums CQ Forums CQ General Discussions CQ18T Shared FX item on Aux Out?

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of willmodelisme willmodelisme 2 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #119224
    Profile photo of tronious
    tronious
    Participant

    Struggling with this not sure what I’m missing.

    I can setup an FX unit like EchoVerb as INSERT and have my Aux 1 (send?) to it.

    However I cannot get a shared FX unit to work on an Aux out.

    Am I missing something? Can I not use a Shared FX on an Aux out? When I tap the tab for IN’s none of the outs are listed (which kinda makes sense I guess?)

    Just would love to have 4 vocalists share the SAME FX Reverb and control how much of it they want wet.

    Advice highly appreciated

    #119225
    Profile photo of tronious
    tronious
    Participant

    Found it

    In case this helps someone

    1. Press Processing button on mixer
    2. Tap “ST. INPUTS/FX”
    3. Tap your FX you want to send to Aux (FX1, FX2, FX3 or Fx4 on right middle of screen)

    4. Tap SENDS at bottom of that particular Fx#

    5. Turn it up in whatever Aux Out you want it processing.

    One other important note. This has a 1 to 1 relationship with the “SENDS TO” level for each input you are monitoring. If that’s not sending anything to the main you don’t get anything in your ear (I might be wrong here though pre/post?)

    #119226
    Profile photo of willmodelisme
    willmodelisme
    Participant

    Check CQ users guide page 48.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.