CQ 12T network

Forums Forums CQ Forums CQ General Discussions CQ 12T network

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #115569
    Profile photo of GazP23GazP23
    Participant

    Hi,
    Has anyone connected a CQ12T to a router yet? I didn’t go for the 18T as I didn’t really need to extra channels or the network feature, but it would be good to know how to set that up via the network port. Is it just a case of getting one of those portable routers, then that creates the local network to then connect an iPad running the MixPad app?
    I don’t really understand this stuff, so I’m sorry if that’s a daft question. Just trying to understand. Cheers

    #115570
    Profile photo of KeithJ A&HKeithJ A&H
    Moderator

    Hi @GazP23

    Not a daft question, and you’re absolutely correct 🙂 you just need to connect the CQ to a network in the same way as you would connect a computer. Then connect the device running CQ-MixPad to that same network (be it wireless or hardwired). Then the app will be able to find and connect to the CQ for control.
    The step-by-step is on page 18 of the user guide here – https://www.allen-heath.com/media/CQ_User_Guide_V1_1_0_iss1.pdf#page=18&zoom=auto,-361,555

    Cheers!
    Keith.

    #115571
    Profile photo of GazP23GazP23
    Participant

    Thanks Keith! Ok, I’ll get a portable router and give that a go.

    #115654
    Profile photo of twostonemusictwostonemusic
    Participant

    Mine works perfect with a router and also works perfect when networking to my PC with Windows 10.

    #115684
    Profile photo of Anonymous
    Inactive

    Yep works just super fine on my CQ12T, immediate detection of the network, hot plug/unplugging, no issue at all.

    #115729
    Profile photo of SkypeLeeSkypeLee
    Participant

    Another successful router connection to report here. Finally got a use for it after all.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.