Corrupt Wav files if unit switched off before recording stopped

Forums Forums CQ Forums CQ troubleshooting Corrupt Wav files if unit switched off before recording stopped

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #117383
    Profile photo of markrmarkr
    Participant

    At gigs we have had a couple of times when the recording was not stopped before the unit was powered down by a bandmate.

    The data is on the SD card but unreadable and showing 0 bytes. Tried repair in Audacity, etc. to no avail.

    Is there a known file repair or plans to ensure interrupted recording are still accessible?

    #117439
    Profile photo of KeithJ A&HKeithJ A&H
    Moderator

    @markr

    There is a process described here – https://support.allen-heath.com/hc/en-gb/articles/4402934227857-SQ-Recovery-of-corrupted-SQ-Drive-recordings
    Although the article has been written with SQ in mind, it would certainly be worth trying with your SD card.

    Thanks,
    Keith.

    #117610
    Profile photo of JacksonJackson
    Participant

    The SQ process worked perfectly for me after thinking I lost some recordings from a great show.
    Seems to keep happening at shows but never once in practice, so I have to assume the power cable is getting yanked when I’m not looking.

    Not as much to worry about knowing this, thanks for the suggestion!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.