Copy on screen parameters, like channel delay

Forums Forums SQ Forums SQ general discussions Copy on screen parameters, like channel delay

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #118574
    Profile photo of hteventshtevents
    Participant

    Hello all,

    From what I understand in the manual, you can copy certain parameters and settings to other channels and mixes for example. But for parameters it says you have to hold copy and press an “In” key to copy the parameter(s) and then press a “Sel” key of the channel you wish to copy the parameter(s) to. Does pressing an “In” key of a parameter that is only on screen also count, like channel delay parameters? Those parameters do not have a physical “In” key.

    Thanks in advance.

    #118687
    Profile photo of SQuserSQuser
    Participant

    I just tried it out for you on a console and can tell you that the In-key(s) on the screen unfortunately don’t work for copying – only the physical keys.

    #118769
    Profile photo of hteventshtevents
    Participant

    Thanks for trying. To bad this doesn’t work. Time for a feature request then I think haha. Or somebody else has to know a way to copy channel delay setting to other channels.

    #118773
    Profile photo of GeoffGeoff
    Participant

    It’s not exactly what you asked for, but creating a ganging group and only selecting “delay” as the attribute will accomplish this. It also means the delays will track if you change one later, which may or may not be what you want.

    Geoff

    #118781
    Profile photo of hteventshtevents
    Participant

    That might be a good one Geoff. Had not thought about that option. I assume that when I “un-gang” the channels, the delay settings will stay as they are, they just are not ganged anymore, so I then I have to change it one by one right?

    #118790
    Profile photo of SQuserSQuser
    Participant

    > Time for a feature request then I think haha.
    Yes, why not for all In’s?

    > Or somebody else has to know a way to copy channel delay setting to other channels.
    I’m afraid it’s currently not possible.
    If you copy a channel completely, the delay value will be copied too, but that won’t solve your problem.

    > I assume that when I “un-gang” the channels, the delay settings will stay as they are, they just are not ganged anymore,
    No no. In this case you would have to set the delay value in the group.
    This means that all channels in this group would have the same delay, which can then be changed together for everyone.
    (You could of course additional set deviations from this common value individually in each channel.)

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.