Copy complete channel

Forums Forums dLive Forums dLive troubleshooting Copy complete channel

This topic contains 14 replies, has 6 voices, and was last updated by Profile photo of Wolfgang Wolfgang 3 weeks, 5 days ago.

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #69491
    Profile photo of RS
    RS
    Participant

    Is there a secret way to copy all settings (except patching) of a respective input channel in a single run?

    #69494
    Profile photo of RedheadRacing
    RedheadRacing
    Participant

    Hold copy button then hit the channel select button. All will be copied except preamp settings.

    #69497
    Profile photo of Wolfgang
    Wolfgang
    Participant

    if you want to copy the preamp settings as well, the best way is to copy the complete channel into the library

    #69503
    Profile photo of RS
    RS
    Participant

    – The library thingy does not work in Director 1.63. Hitting “lib” does do nothing
    – copy+sel does not copy the Aux sends. Found no other way to get this going

    #69508
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Copy + Sel copies the channel processing.
    Copy + Mix copies the mix assignments and send levels.

    #69509
    Profile photo of RS
    RS
    Participant

    Thx Nicola!
    Is there a reason the channel “lib” seems to be not working in Director 1.63?

    #69530
    Profile photo of Wolfgang
    Wolfgang
    Participant

    the libraries work fine with me, both in 1.62 and 1.63
    how do you choose them?

    #69531
    Profile photo of Wolfgang
    Wolfgang
    Participant

    ah, I have a hunch:
    you selected a channel, but the processing screen is still in BANK?

    switch it to OVERVIEW, then it works with the Librarys as well. 😉

    that might be one reason for a wish:
    it would be nice if you could select the channel library in the BANK view as well.

    #69575
    Profile photo of RS
    RS
    Participant

    Thanks, that’s how the “lib” way works. But only the processing gets stored in the lib, no send levels nor headamp settings.
    And storing or copying the processing (using lib or copy+sel) does not include inserts either.

    So we are still far away of a fast way to copy the complete channel. Right now it takes four actions to do it, if a channel includes a insert. 5 if 2 inserts are used.

    #69613
    Profile photo of Wolfgang
    Wolfgang
    Participant

    that no send levels are stored in the processng libraries is clear. only the channel’s processing settings are stored here.
    but the headamp-data is also stored in the library! you only have to make sure that “Recall Preamp” is activated.

    that the inserts are not stored in the libraries I have also criticized already. it would be nice if this would work.

    #69620
    Profile photo of RS
    RS
    Participant

    Oh, I have overseen the “Recall Preamp”. Thanks for the clarification.
    So if we could get the possibility to store inserts and send levels in the library, and this could be a switchable option to suit everyones needs, we would have a streamlined solution in one place.

    Who is adding this to the wish list?

    #69622
    Profile photo of Steffen R
    Steffen R
    Participant

    I think it is already on the list

    #69628
    Profile photo of Wolfgang
    Wolfgang
    Participant

    I also remember that we have mentioned these themes before.
    but there’s no harm in picking it up again.

    #81123
    Profile photo of mixJM
    mixJM
    Participant

    Is there an official wish list?

    #81129
    Profile photo of Wolfgang
    Wolfgang
    Participant

    No, there’s no official wish list.
    the wishlist is at A&H, we don’t have any insight into it.

Viewing 15 posts - 1 through 15 (of 15 total)

You must be logged in to reply to this topic.